Operation Manual

5. Adjust:

- CO concentration.

Adjustment steps:

- Turn the mixture screw inwards or outwards until the spe-

cified CO concentration is obtained.

Adjustment band:

Rub probe point~ up to 6 turns outwards.

N.B.

TURN THE NO LOAD RUNNING SCREW (2) TO ADJUST

THE ENGINE’S NO LOAD RUNNING, SINCE THE CO

CONCENTRATION ADJUSTMENT MAY AFFECT THE NO

LOAD RUNNING.

- After adjusting, check the CO concentration and remove

the CO probe. Ensure that there are no variations in the

idle speed.

ADJUSTING THE THROTTLE CABLE

N.B.

BEFORE ADJUSTING THE THROTTLE CABLE, THE NO LOAD

RUNNING MUST BE ADJUSTED.

1. Check:

- Throttle cable play (a).

Outside that specified => Adjust.

Clearance:

2÷6 mm.

In the throttle twist grip plate:

2. Adjust:

- Throttle cable play.

Adjustment steps:

N.B.

NEVER ACCELERATE WHILE THE ENGINE IS STOPPING.

ADJUSTING

THE

THROTTLE

CABLE