Operation Manual

128
2. Place the front wheel in its correct position.
3. Fit:
- Top plate, with half handlebars fitted to it.
- Top plate nut.
Top plate nut:
30-35N.m(3-3.5kgf.m)
FITTING THE HALF HANDLEBARS
1. Fit:
- Components corresponding to the side to be fitted.
2. Fit:
- The half handlebars onto the top plate.
Fitting torques:
- Plate to half handlebar nut:
17 - 19 N.m with sealer (1.7 – 1.9 kgf.m)
- Handlebar counterweight:
3.5 - 4.5 N.m (0.35 -0.45 kgf.m)
N.B.
- APPLY A THIN LAYER OF LITHIUM SOAP BASED GREASE
TO THE RIGHT HAND END OF THE HANDLEBARS.
WARNING
CHECK THE FUNCTIONING OF THE THROTTLE TWIST-
GRIP.
3. Adjustment
- Throttle cable play.
- Functioning of the brakes.
See the “ADJUSTING THE BRAKE CABLES/ADJUSTING
THE BRAKE LEVER” section in CHAPTER 3.
F
ITTING
THE
HALF
HANDLEBARS