Operation Manual

108
DISMANTLING
WARNING
- ENSURE THAT THE MOTORCYCLE IS SUPPORTED FIRMLY
AND THERE IS NO RISK OF IT FALLING.
- PLACE THE MOTORCYCLE ON A FLAT SURFACE.
1. Extract:
- Wheel axle (1).
- Spacer.
N.B.
ON WITHDRAWING THE WHEEL AXLE, THE SPACER WILL
DROP DOWN. TAKE CARE NOT TO LOSE IT.
2. Extract:
- Rear wheel.
N.B.
ON EXTRACTING THE WHEEL, PUSH THE WHEEL FORWARDS
TO REMOVE THE DRIVE CHAIN, THEN EXTRACT THE WHEEL
BACKWARDS TO AVOID THE BRAKE CALLIPER.
DISMANTLING THE REAR DISK CALLIPER
- Loosen the bolt at the bottom end of the flexible brake hose
and tighten it slightly (1)
- Unscrew the bolt securing the brake puller (2) and remove
the clips (3) joining the flexible hose to the puller.
- Extract the wheel axle (4).
- Remove the brake calliper (5).
PRECAUTION
CLEAN OFF ANY SPILT BRAKE FLUID REMAINS IMMEDIATELY.
DISMANTLING
DISMANTLING
THE
REAR
DISK
CALLIPER