Technical data

243
POSSIBLE CAUSE
WORK
Electronic ignition device failure. With the key switch set to «ON» connect the jumpers 1
(Blue-Black) and 5 (Red/Blue) on the control unit con-
nector. If lights do not turn on and remain solid when
the flashing light control is actuated, replace the con-
trol unit, otherwise check the wiring and the switch.
TURN SIGNAL LIGHTS MALFUNCTION
F
LASHING LIGHTS NOT WORKING
POSSIBLE CAUSE
WORK
Excessive steering wheel clearance Check the tightening of the top and bottom ring nut.
If the anomaly continues during the steering wheel
rotation even after the adjustment, check the bearing
ball rolling seats. If they are recessed or if the balls are
squashed, replace.
HEAVY STEERING
H
ARDENING STEERING
STEERING AND SUSPENSIONS
POSSIBLE CAUSE
WORK
Steering wheel difficult to operate Check the tightening of the top and bottom ring nut.
If the anomaly continues during the steering wheel
rotation even after the adjustment, check the bearing
ball rolling seats. If they are recessed or if the balls are
squashed, replace.
EXCESSIVE STEERING PLAY