Specifications
–32 –
Advanced 1 Features
Press the Menu button to open the OSD menu. Press the buttons to move to the Settings 2
menu. Press the buttons to move to the Advanced 1 menu and then press (Enter) or .
Press the buttons to move up and down in the Advanced 1 menu. Press the buttons to
enter and change setting values.
ITEM DESCRIPTION
Menu Position Press the buttons to enter and select different OSD location.
Translucent Menu Press the buttons to enter and select OSD background translucent level.
Low Power Mode Press the buttons to enter and turn Low Power Mode on or off.
Fan Speed
Press the buttons to enter and toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
Lamp Hour Reset
After replacing the lamp, this item should be reset. See page 33 for more information
on Lamp Hour Reset.
Projector ID
Press the buttons to enter and adjust the two digit projector ID from 00 through
98.
ISF Mode
Press the buttons to enter and adjust ISF parameters.
Note: This feature does not display in the menu system unless a IFS technician has
enabled this feature.