Specifications

13
Setting an Access Password (Security Lock)
You can use the four arrow buttons on the remote to set a password and prevent unauthorized
use of the projector. When enabled, the password must be entered after you power on the projector.
(See Navigating the OSD on page 17 and Setting the OSD Language on page 18 for help on using
OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact DepthQ
®
Support for information on clearing the password.
1.
Press the MENU button to open the
OSD menu.
2.
s to move to the
Settings 1 menu. Press the
buttons to select Advanced 1.
3.
Press (Enter) or to enter the
Advanced 1 sub menu. Press the
s to select Security Lock.
4.
s to enter and
enable or disable security lock
function.
A password dialog box automatically
appears.