Premium- User Manual- FR

5 - Press
to confirm th erasing
6 – Repeat 2 to 5 if you want to e ase another te
e
r lephone number from memory
7 – Replace the handset or press
or buttons
rom o
et or press
- Recalling a stored number
F ne-touch memory:
or 1 – Pick up the hands buttons,
memory locations M1 to M10 and numbers stored will be dialled out
From tw
2 – Press one of th
automatically.
e
o-touch memory:
1 – Pick up the handset or press or buttons,
2 – Press and one of the memory locations M11 to M20 and numbers stored will be
11 - BIS/P LNR key
dialled out automatically.
, pick up the handset, press or buttons and press the For last number redial key.
erase the LNR memory, after hang up, pick up the handset and keep pressed the To during
nfi the erasing 2 seconds, a double sharp sounds in the handset co rms
12 – CODE
Factory code is “0000”.
o change the code proceed as follows (Phone connected and off hook): If you want t
« » « » « » « 0000 » (Old Code) (2 sharp sounds in the handset confirms
the operation) « NNNN »(New code) « (2 sharp sounds in the handse
operation)
t confirms the
Lost code:
Phone on hook, press and keep « » « » « » keys pressed , pick up the handset and
release the keys (2 sharp sounds in the handset confirms the operation) the phone is totally reset
re erased and the phone gets back to factory settings) (Memories a
13 - BARRING AND LOCKING
To activate or deactivate the barring and locking function: Phone on hook, press and keep
«
» key pressed, pick up the handset, release the key and dial the 4 digits code (0000 Factory
phone is barred, no programming, no memories are possible. The keypad can be used but
setting).
The unlocked phone gets locked.
The locked phone gets unlocked.
When the
only up to 4 digits.
13