Premium- User Manual- FR

- HEADSET (Only Premium 200)8
The Headset feature is available when a headset is connected to the “Headset port”
he headset mode is activated when the T key is pressed. The indicator lamp will light during
Headset operation. .
The Headset volume can be adjusted, 4 Volume steps are available.
Choose your handset volume as follows: Press the to increase the volume and to
remium 200)
decrease, each step is 5 dB.
The last volume choice is always memorised.
9 - SPEAKERPHONE OPERATION (Only P
ou can make or receive calls « Handfree » by pressing Y key, The indicator lamp will light
during speakerphone operation.
Adjust 5 steps volume with keys, each step is 5 dB. The last volume choice is
always memorised.
10 - MEMORY OPERATION
10 one touch memories (M1 to M10) and 10 two touch memories
ory), * # Pause could be included in memory.
Premium 100/200 can store up to
Up to 32 digits on EEprom mem(
- Storing one touch memory:
1 – Pick up the handset or press or buttons,
2 – Press
3 – Press the memory location M1 to M10
the telep one number you want to store including * # or Pause if needed 4 – Key in h
5 - Press to confirm the storing
6 – Repeat 2 to 5 if you want to store another telephone number into memory
7 – Replace the handset or press
or buttons
1 – Pick up the handset or press
- Storing two touch memory:
or
buttons,
2 – Press
and
3 – Press the memory location
M o M20
the telep umber you want to store including * # or Pause if needed
11 t
4 – Key in hone n
5 - Press to confirm the storing
6 – Repeat 2 to 5 if you want to store another telephone number into memory
7 – Replace the handset or press or buttons
1 – Pick up the handset or press
- Erasing a stored number
or buttons,
2 – Press
and (Shift key only for two touch memories, one touch no
memo
needing)
3 – Press the ry locations M1 to M10
4 – Press P ause key
12