HD 2000 SIP Manual

10. RESTORE TO FACTORY DEFAULT SETTINGS

Warning:

Restoring to the factory default settings will delete all configuration information of the

device.

Steps to follow in restoring to factory default settings by keypad:

a) Press “***” for voice prompt.

b) Enter “99” and then you will hear the voice prompt “Reset”.

c) Enter the number “862584658050”. A "click" sound will be heard.

d) Wait for 15 seconds.

The device is now restored to the factory default setting.

You can also reset the phone via web page. Enter in the super option, and click the

‘Reset to factory setting’ button. Then the device will be restored and reboot.

Restoring to factory default settings by Reset key:

this key is located behind the base of the unit, , at the level of the lower wall mount fixing

hole, a

hole in the plastic case allows to reach it.

Press about 20 seconds the reset key, then disconnect and reconnect the Ethernet cable

(PoE) or

the power supply, the device will be restored and reboot.