HD 2000 SIP Manual

Options Meaning

Pcap Feature

8.1.6. Saving the Configuration Changes

Once a change is made, users should click on the “SaveSet” button in the Configuration

page, as follow:

8.1.7. Rebooting the HD2000IP

You can reboot the HD2000IP by clicking on the “Reboot” button after each update to the

configuration page. Alternatively, you can reboot by unplugging the power supply of the

HD2000IP and then powering it on again. If your HD2000IP ever becomes “stuck” or

un-responsive, you can unplug the power supply to reboot it. Frequent rebooting by

unplugging the power supply is not recommended and should not be necessary.

8.1.8. Configuration through a Central Server

HD2000IP devices can be automatically configured from a central provisioning system.

When HD2000IP boots up, it will send TFTP or HTTP request to download configuration

files.