HD 2000 SIP Manual

Management - Auto Provision
Options Meaning
PnP Active The request to the server to obtain a support URL for upgrade.
Upgrade Mode Type of the provider : TFTP/HTTP/FTP/HTTPS
Firmware Server Path needs to be set to be a valid URL of a provider server, server
name
can be in either FQDN or IP address format. Below are
examples of
some valid URLs.
e.g. firmware.mycompany.com:5688/Depaepe
e.g. www.mycompany.com:5688/fm/Depaepe
e.g. 218.2.83.110
By default address_ip_server_provider/fm
Config Server Path needs to be set to be a valid URL of a provider server, server
name
can be in either FQDN or IP address format. Below are
examples of
some valid URLs.
e.g. firmware.mycompany.com:5688/Depaepe
e.g. www.mycompany.com:5688/cfg/Depaepe
e.g. 218.2.83.110
By default : address_ip_server_provider/cfg
Allow DHCP Option Allow DHCP Option (128 or 150 or 66).
To Override Server
Auto Upgrade
Check for upgrade every Check for upgrade every ? Minutes.
HTTP/FTP/HTTPS UserName HTTP/FTP/HTTPS UserName
HTTP/FTP/HTTPS Password HTTP/FTP/HTTPS Password.
Firmware/Config File Prefix Firmware Prefix allows device to download the firmware name
with
the matching Prefix.
Firmware/Config File Postfix Firmware Postfix allows device to download the firmware name
with
the matching Postfix.
Upgrade Check Mode
Authenticate Cfg File Enable if Yes or disable if No Cfg File.
Set Common AES Key The XML configuration file could be encrypted in AES-128-
CBC
algorithm. The encryption password is defined in P8631
(Management->Auto Provision->Set Common AES Key ) of the
configuration file. The Password length is from 1-16, and
password
must be[ 0-9,A-F].
Autoprovision Now
43