HD 2000 SIP Manual

Network -Advanced
Options Meaning
LLDP Active : select the desired value from the
pull-down list of Active.
Packed interval : enter the desired time(in
seconds) in the Packet
interval (1~3600s) field.
Qos Set Layer 3 Qos : This field defines the layer 3
QoS parameter which can
be the value used for IP Precedence or Diff-
Serv or MPLS. Default
value is 48.
Layer 2 Qos : Value used for layer 2 VLAN
tag. Default setting is
blank.
Data VLAN Tag : Valid only when bridge
mode.
VPN Active :
Upload VPN Config :
DHCP VLAN Active : yes or no (DHCP option 132)
Web Server HTTP Port : default for http is 80.
HTTPS Port :
Type :
802.1X 802.1X Mode :
Identily :
MD5 Password :
Local RTP Port Max Rtp Port : The Largest RTP Port :
Should be large than
(Min-RTP-Port +100) and less than 65535.
Min Rtp Port : The Lowest RTP Port :
Port>= 1024
VQ RTCP Report RTCP Support : If Enable, Phone will
statistic analysis RTP Info,
Then Report to Collector if Need.
Voice Quality Report Collector : The RTCP
Collector Info, e.g :
sip:[e-mail]:8765.
RTCP-XR-report Format : The Format of
Reported PUBLISH Info
Others STUN Server : URI or IP:port
Keep-alive interval : default 20 seconds.
35