HD 2000 SIP Manual

Network – Basic

Options Meaning

WAN

WAN There HD2000IP operates in two modes:

1. DHCP mode: all the field values for the

Static IP mode are not used

(even though they are still saved in the

Flash memory.) The HD2000IP

acquires its IP address from the first DHCP

server it discovers on its

LAN. The DHCP option is reserved for NAT

router mode. To use the

PPPoE feature, set the PPPoE account

settings. The HD2000IP

establishes a PPPoE session if any of the

PPPoE fields are set.

2. Static IP mode: configure all of the

following fields: IP address,

Subnet Mask, Default Gateway address,

Primary DNS , Secondary

DNS. These fields are set to zero by default.

3. PPPoE mode :

Reply To ICMP If set to “Yes”, the HD2000IP will respond to

the PING command from

other computers, but it also is vulnerable to

the DOS attack. Default is

No.

WAN Http Access If this parameter is set to “No”, the HTML

configuration update via

WAN port is disabled.

PC port

PC port As Bridge

As Router

IP address

Subnet Mask

IP Lease Time

DHCP Server :

Port Map :