HD 2000 SIP Manual

Label The name show on the LCD of the current device
SIP User ID SIP service subscriber’s User ID
Authenticate ID SIP service subscriber’s Authenticate ID. Can be identical to or
different from SIP User ID
Authenticate
Password
SIP service subscriber’s account password
Name SIP service subscriber’s Label which will be used for Caller ID display.
DNS Mode Default is ARecord. If select SRV the client will use DNS SRV for
server
Lookup.
User ID is Phone
Number
If the HD2000IP has an assigned PSTN telephone number, this field
should be set to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a
“user=phone” parameter will be attached to the “From” header in SIP
request
SIP Registration This parameter controls whether the HD2000IP needs to send
REGISTER messages to the proxy server. The default setting is “Yes”.
Unregister On
Reboot
Default is “No.” If set to “Yes”, then the SIP user will be unregistered
on reboot.
Register Expiration This parameter allows the user to specify the time frequency (in
minutes) the HD2000IP refreshes its registration with the specified
registrar. The default interval is 60 minutes (or 1 hour). The maximum
interval is 65535 minutes (about 45 days).
Outgoing call
without registration
Default is No. If set to “Yes,” user can place outgoing calls even when
not registered (if allowed by ITSP) but is unable to receive incoming
calls.
Local SIP Port This parameter defines the local SIP port the HD2000IP will listen and
transmit. The default value for FXS port is 5060. The default value for
FXO port is 5062.
Use Random port This parameter, when set to Yes, will force random generation of both
the local SIP and RTP ports. This is usually necessary when multiple
HD2000IP are behind the same NAT.
Voice Mail User ID The number for check voice mail.
RPort RPort in RFC 3581.
RFC 2543 Hold By default is Yes. Enable if Yes or disable if No : Hold
23