HD 2000 SIP Manual

8. CONFIGURATION GUIDE

8.1. Configuring HD2000IP using Web Browser

HD2000IP has embedded Web server and HTML pages that allow users to configure the

HD2000IP through an easy-to-use Web browser interface such as Firefox browser. Below

is a screen shot of the HD2000IP configuration page:

8.1.1. Get the IP address of the HD200IP:

Connect the HD2000 IP to a network via standard Ethernet cable, be default the

HD2000IP is in DHCP mode.

If it is the HD2000IP with keypad, use the voice menu to get the IP address of the

HD2000IP (see the 7.1 get familiar with voice menu)

If you have the HD2000 IP urgency, use a standard network protocol analyzer (for e.g.

Wireshark) to eavesdrop the IP address allocated to the base unit by the DHCP server.

You can also contact with your administrator to get the IP address allocated to HD2000IP

by DHCP server.

8.1.2. Accessing the Web Configuration

The HD2000IP configuration page can be accessed via your web browser by entering the

WAN IP

address: http://yourip’s

Be sure that your PC is connected to the same VLan with the HD2000IP.