HD 2000 SIP Manual

08 Your number is The current number is announced.
12 WAN Port Web Access Enter “9” to toggle between enable
and
disable
13 Firmware Server IP Announces current Firmware Server IP
address
Announces current Firmware
Server IP
address. Enter 12 digit new IP
address.
14 Configuration Server IP
Address
Announces current Config Server
Path IP
address. Enter 12 digit new IP
address.
15 Upgrade Protocol Upgrade protocol for firmware and
configuration update.
Enter “9” to toggle between TFTP
and HTTP
16 Firmware Version Firmware version information.
17 Firmware Upgrade Firmware upgrade mode. Enter “9”
to rotate
among the following three options:
1.
2. always check
check when pre/suffix changes
3. never upgrade
47 “Direct IP Calling” Enter the target IP address to
make a direct IP
call, after dial tone. (See “Make a
Direct IP
Call”.)
99 “RESET” Enter “9” to reboot the device; or
Enter MAC address to restore
factory default
setting (See Restore Factory
Default Setting
section)
“Invalid Entry” Automatically returns to Main
Menu
Other Menu Prompt Features:
➢ “*” shifts down to the next menu option
➢ “#” returns to the main menu
➢ “9” functions as the ENTER key in many cases to confirm an option
➢ All entered digit sequences have known lengths - 2 digits for menu option and 12
digits for IP address. Once all of the digits are collected, the input will be processed.
➢ Incorrect keyed entry cannot be deleted or undone. The HD2000IP will prompt you
to start over by telling you that you made an error.
12