HD2000 IP - User Manual

HD2000 IP User Manual

8. CONFIGURATION GUIDE

8.1. Configuring HD2000IP using Web Browser

HD2000IP has embedded Web server and HTML pages that allow users to configure the

HD2000IP through an easy-to-use Web browser interface such as Firefox browser. Below is a

screen shot of the HD2000IP configuration page:

8.1.1.

Get the IP address of the HD200IP:

Connect the HD2000 IP to a network via standard Ethernet cable, be default the HD2000IP is in

DHCP mode.

If it is the HD2000IP with keypad, use the voice menu to get the IP address of the HD2000IP (see

the 7.1 get familiar with voice menu)

If you have the HD2000 IP urgency, use a standard network protocol analyzer (for e.g. Wireshark)

to eavesdrop the IP address allocated to the base unit by the DHCP server.

You can also contact with your administrator to get the IP address allocated to HD2000IP by

DHCP server.

8.1.2.

Accessing the Web Configuration

The HD2000IP configuration page can be accessed via your web browser by entering the WAN IP

address: http://yourip’s

Be sure that your PC is connected to the same VLan with the HD2000IP.