HD2000 IP - User Manual

HD2000 IP User Manual
Copyright © 2015 SAS HENRI DEPAEPE Page 13 of 52
08
Your number is
The current number is announced.
12
WAN Port Web Access
Enter “9” to toggle between enable and
disable
13
Firmware Server IP
Address
Announces current Firmware Server IP
address. Enter 12 digit new IP address.
14
Configuration Server IP
Address
Announces current Config Server Path IP
address. Enter 12 digit new IP address.
15
Upgrade Protocol
Upgrade protocol for firmware and
configuration update.
Enter “9” to toggle between TFTP and HTTP
16
Firmware Version
Firmware version information.
17
Firmware Upgrade
Firmware upgrade mode. Enter “9” to rotate
among the following three options:
1. always check
2. check when pre/suffix changes
3. never upgrade
47
“Direct IP Calling”
Enter the target IP address to make a direct IP
call, after dial tone. (See “Make a Direct IP
Call”.)
99
“RESET”
Enter “9” to reboot the device; or
Enter MAC address to restore factory default
setting (See Restore Factory Default Setting
section)
“Invalid Entry”
Automatically returns to Main Menu
Other Menu Prompt Features:
 “*” shifts down to the next menu option
 “#” returns to the main menu
 “9” functions as the ENTER key in many cases to confirm an option
 All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. Once all of the digits are collected, the input will be processed.
 Incorrect keyed entry cannot be deleted or undone. The HD2000IP will prompt you to start over
by telling you that you made an error.