HD_2000_Urgence_-_FR_-_EN_-_2020

Ringer

Ringer volume can be adjusted with the sliding switch located on the right side of the

telephone.

NOTE: Calls are indicated by the blinking LEDs.

Handset on hold position (Wall-mount position)

See page 4 and 5. This feature can be used to secure the handset while waiting for

someone to “come to the phone” without going back to on-hook condition.

Wall mount installation

The HD2000 Urgence comes with a line cord and a small plastic bag containing 1 thin

screw and a foam plug to be used for preventing theft or unauthorized removal and 2

bigger screws for wall mount fixing.

1- Drill 2 holes as shown on the wall mounting layout. Install the 2 bigger screws in those

holes on the wall.

2- If the telephone must be secured against thefts or unauthorized removal, drill a third

hole as shown on the wall mounting layout.

3- Align the 2 slots at the back of the HD 2000 in front of the 2 screws and pull down.

4 -If needed, install the third screw through the hole located above the telephone (See

pages 28 and 29) and hide it with the foam plug.