HD_2000_Urgence_-_FR_-_EN_-_2020

Mode 2 HD2000 Urgence 2 or 3

1) Make sure HD2000 Urgence is connected to the line.

2) Lift the handset.

3) Depress "PGR" key located on the small keypad.A "beep" sound should be heard

through the receiver.

4) Dial the telephone number to store including *, # or "Pause" if needed (22 digits maxi).

5) Press the memory location“M1, M2, M3”.A double "beep" sound confirms the right

storage.

6) Replace the handset on hook.

Repeat operation 3 to 5 for the other memories.

NOTE: In case of wrong operation, a long "beep" sound is emitted. Replace the handset

on hook and start againfrom the beginning.

NOTE: To erase a number stored in memory, proceed from 1 to 3, skip section 4 (Do not

enter any digit) press the memory to erase as in 5 and terminate as in 6 and 7.

NOTE: HD2000 Urgence2 and 3 factory settings come with “Normal“ mode. In case of

wrong operation, see «LIST OF SETTINGS» pages 24-25 and check that “Normal” mode

is selected.

Setting access code :04

Setting choice Normal:0