User Manual

Go to table, select .
3. Insert all
4. Fill in sender email info in and
5. Go to table,choose
6. Click button and save as Parameter.dat to microSD card.
7. Plug USB cable from camera.
8. Go to in cam menu, check the subsetting is the same with above setting.
9. Turn camera to on mode.
F. SMS Command List
MMS/SMTP need to be set ‘on' mode before using thes sms command
1 *500* take picture
(can work in both mms and smtp mode)
SIM in camera will send picture to the phone you set in parameter when received *500* command
2. *505* take picture and send to the mobile who sends sms
sim in camera will send picture to inserted Mobile ID and/or email when got* 505* Command, no matter MMS or smtp mode.
But sim will send images via MMS to the mobile who sends SMS when camera only in MMS mode
3.*520* check the picture quantity and battery status
(can work in both MMS and SMTP mode)
SIM will send Total Jpg: Free Space: Battery Level: when recieve *520*
command 4. *530* turn on sensor
(can work in both MMS and SMTP mode)
SIM will send Start OK when recieve *530*
command 5. *531* turn sensor to sleeping mode
(can work in both MMS and SMTP mode)
SIM will send Stop OK when recieve *531* command