Operation Manual

Introduction
2. Rear View
4. HDMI1/2: Connect it to the HDMI of DVD or other equipment.
5. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
7. PC AUDIO: Connect it to the audio output terminal of PC.
10.SCART1/2 Connect them to the composite terminal of DVD.
8. YPbPr: Connect them to the video output terminal of DVD.(used in YPbPr source).
9. VIDEO: Connect it to video output terminal of DVD.
L/R in:
L/R in:
Connect them to the audio output terminal of DVD(Shared with VIDEO/ S-VIDEO/
YPbPr).
6. S-VIDEO: Connect it to S-VIDEO output terminal of DVD.
11.RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
3. USB-for update:Software update.
AC POWER IN: Connect to an earth 100-240V,50-60Hz AC outlet with the Power Cable.
1.
2. SWITCH: Switch on or off the power suply.
3 4 5 6
7 8
9 10 11
- To turn on the LCD TV
- Be sure to turn off the power and unplug both units
from the wall outlet before making any connections.
Power on
Power off
21
USB-
for update
1 2
P
b
P
r
V
ideo
Y
R
in
L
in
R in
L
in
Connect them to the audio output terminal of DVD(withYPbPr ).
6
AC POWER IN SWITCH