Operation Manual

Timer: press the button to enter the timer menu as the following picture.
First you should set the current time according to fact, then you can set the time of turn off the TV
on the item"TURN OFF", set the time of turn on the TV on the item"TURN ON", and on the item
"TURN ON PROGRAM" you can set the program you want to display when it turns on.
Channel
Move Select Exit
CURRENT
TURN OFF
TURN ON
TURN ON PROGRAM
00:00
_ _:_ _
_ _:_ _
1
PC
Move Select Exit
Clock
Phase
H.Position
V.Position
Auto
7.5 PC menu(the menu can only be used in the mode of PC)
Clock: adjust the pixel clock frequency, until the image size is maximized for the screen.
Phase: adjust the phase of the ADC sampling clock relative to the sync signal, until a stable
image is obtained.
H/V. Position: adjust the transverse/vertical position of the screen.
Auto: press the button to setup the parameter of the screen automatically.