Operation Manual

Auto Tune
140. 15MHz VHF L
0
7.3 Channel menu(the menu can only be used in the mode of TV)
Channel
Move Select Exit
Auto Tune
Manual Tune
Fine Tune
Skip
Sound.SYS
Channel Swap
Off
D/K
Auto Tune: press button, it will start searching from the lowest frequency. When it finds a
station it will automatically store this in the first location and move to the next. When Auto
Tune is complete, the TV will display the first station found. In most cases the stored stations
will be in the random order, therefore you should use the "Channel Swap" function to
exchange them into the order you need.
Note: when the Auto Tune starts, you can press SYS MENU button to stop it or it will not stop
until all the searching is finished.
Manual Tune: press button to search forwards, and press button to search backwards. When
a station found, it will be stored automatically.
Fine Tune: press button to search forwards, and press button to search backwards when
the signal of the current channel is weak.
Skip: When you turn on the function, the current channel will be skipped when you scan the
channels.
Sound.SYS: select the sound system mode.