User Manual

WARNINGS

Please read the manual completely and the instructions below before using the

product.

Product names: SEL-80130F

Product type: Electric scooter

Year of manufacturing: 2020

• Note: ONLY use the supplied charger labelled XHK-800B-4220 with the following output voltage

to charge this Electric scooter: 42V – 2A.

• Using another charger may damage the product or create other potential risks.

• Never charge the product without supervision.

• The charging period of the product should not exceed four hours. Stop charging after four hours.

• The product should only be charged in temperatures between 0°C and 45°C.

• If charging at lower or higher temperatures, there is a risk that the performance of the battery

will be reduced and a potential risk of damage to the product and personal injury.

• The product should only be used in temperatures between -10°C and +45°C.

• If used at lower or higher temperatures, there is a risk that the performance of the battery will

be reduced and a potential risk of damage to the product and personal injury

• Store the product at temperatures between 0°C and 35°C. (optimum storage temperature is 25°C)

• Charge and store the product in an open, dry area and away from flammable materials (i.e.

materials that may burst into flames).

• Do not charge in sunlight or near open fire.

• Do not charge the product immediately after use. Let the product cool down for one hour before

charging.

• If the product is left with other persons for example during a holiday period, it should be partially

charged (20-50% charged). Not fully charged.

• When shipped from the factory, the product has often been partially charged. Keep the product

in a partially charged state, until it is going to be used.

DENVER ELECTRONICS A/S

Omega 5A, Soeften, 8382 Hinnerup, Denmark