User Manual

18
14.4 Safe riding
This chapter focuses on safety, experience, and warnings. Before operating the vehicle, please read all
installation and operating instructions carefully.
WARNING
Familiarize yourself with the vehicle before you use it so that you can keep the Electric scooter in sound
condition.
Observe all safety instructions when riding the Electric scooter.
Children, elderly people, and pregnant women are not allowed to ride the vehicle.
People with limited sense of balance are not allowed to ride the Electric scooter.
Avoid riding the Electric scooter under the influence of alcohol or other substances.
Do not carry any objects while riding.
Make sure you have a clear vision in front of you to ride the Electric scooter safely.
While riding, your feet must always be on the foot board.
The Electric scooter can accommodate only one person.
Do not start or stop abruptly.
Stop riding the Electric scooter if you hit a solid object (such as a wall or other structure) with it.
Do not ride in dimly lit or dark places.
Ride the Electric scooter at your own risk, we assume no liability for accidents or damage.
Ride at a safe speed that allows you to stop at any time.
Keep the Electric scooter at a sufficient distance from other people and avoid collisions.
Steer through balance shifting, fast movement can result in falls.
Do not ride in rain or under other wet conditions. Ride only in dry weather.
Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces.
Avoid riding over textiles, small branches, and stones, if possible.
Avoid riding in narrow places or in places with obstacles, if possible.
Jumping on and off the Electric scooter will cause damage that is not covered by the warranty.
There is a risk of injury. Injuries and damage due to "trick riding" are not covered by the warranty.
14.5 Charging
Make sure that the Electric scooter, charger, and DC power input of the device are always dry.
Note: To charge this Electric scooter, use SOLELY the supplied HLT-180-420200 charger with the
following output: 42 V -2A.
Using a different charger may cause damage to the device and other potential risks.
Use the mains adapter to plug the DC input of the device into a conventional socket.