EN DEVICE DESCRIPTION AND FUNCTION KEYS 1 2 3 4 1 Spindle adapter.
EN 9 10 11 12 13 14 2.
EN Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3 Standby (ON/OFF) 0-9 Keyboard Scan Select Vol + / EQ Tune + / Skip Forward Mode (Phono / DAB / FM / CD / BT / Aux) Play / Pause Tune - / Skip Backward Stop Mute Infor/Menu CURSOR Preset / Program / Repeat Eject
EN SETUP Positioning the Retro Turntable Where will your Retro Turntable and speakers be situated? If you place the Retro Turntable on the same surface and very close to the speakers, the sound quality can be affected by the airborne movements coming from the speakers and from any vibrations from the surface on which they have been placed. If at all possible, it is recommended that you leave a space of approximately 40cm between each speaker.
EN FIRST STEPS AND USE Set the clock In standby mode: 1. Short press the POWER button. 2. A '0000' will now flash in the display. Short press the Tune/Skip buttons to display the correct hour and then short press the Play button to confirm. 3. The minute digits will then flash in the display. Short press the Tune/Skip buttons to display the correct minutes and then short press the Play button to confirm. 4. Your clock is now set and will be displayed in Standby mode. Power on Short press the Power button.
EN RECORD PLAYER Check that your Retro Turntable is in PHONO/Turntable mode. If you are not already in PHONO mode, repeatedly short press the Source button until you are in PH mode (check the display). PHONO will be displayed. Auto Stop On/Off Under the dust cover and to the right of the tone arm, there is an OFF/ON slide switch. This is for the turntable auto stop feature.
EN 5. Select the correct speed for your record using the RPM selector switch. 6. Choose to turn the auto stop for the turntable on or off, as required. 7. Use the tone arm lever to lift the tone arm. 8. Move the tone arm across to your record. 9. Use the tone arm lever to gently lower the stylus onto the groove on your record. Your record will begin to play. 10. Use the large right hand rotary control to adjust the volume. 11.
EN CD controls Play/Pause: Short press the Short press the . button The track number will show in Pause mode. Next track: Short press the Tune/Skip + button Previous track: Short press the Tune/Skip - button Stop: Short press the ■ button. Repeat and Random modes Short press the Preset/Repeat button on remote control. A icon is displayed.
EN Remove the CD Short press the button. The CD drawer will open and 'Open' will be displayed. Remove the CD from the compartment. Short press the . button to close the CD drawer. ‘- - -’followed by 'NO Disc' will be displayed. Note: It you stop or pause playing a CD for approximately 15 minutes, your product will go to Standby mode automatically.
EN FM RADIO If you are not in FM mode, repeatedly short press the Source button to go to FM mode (check the display). If you were listening to an FM station when you switched the product to standby mode then this station will be automatically selected when you switch the product back on. Wire radio aerial Please make sure that the wire aerial on the back of the Retro turntable is fully extended and adjusted before you attempt to tune to an FM radio station (a vertical position is recommended).
EN Tuning to an FM station preset In FM mode: 1. Short press the Preset button on remote control to the preset locations (1-20). 2. Short press the ▲ or ▼ button on remote control or use the Tune/Skip + or button on the Retro Turntable to move the preset number that you would like to listen the radio station. Short press the Select button then your product will tune to and play the stored station. DAB RADIO MODE • Check that your Retro Turntable is in DAB mode.
EN In DAB mode: Press and hold the MENU button or Scan button of Retro Turntable or press the MENU button of remote control, short press the ▲ or ▼ buttons on remote control or use Turn/Skip + or - on Retro Turntable to select full scan then press Select button to full scan. Prune DAB stations You can remove the DAB stations in the station list that cannot be received in your area. These are listed with a '?' prefix. 1.
EN BT MODE With your Retro turntable you can connect wirelessly to other compatible BT devices and stream music, which can then be heard through the Retro Turntable stereo speakers. Before you can use your Retro Turntable in BT mode, you need to ‘pair’ it with a BT capable device, such as an iPod/iPhone/iPad/tablet/Android/ other phone/Computer. 1. If you are not in BT mode, repeatedly short press the Source button to go to BT mode (check the display). 2.
EN 2. You can use the controls on your paired BT device as well as those on the Retro Turntable when listening to music via BT. Controls available on your product are: Play/Pause Short press to play/pause . Note: If you long press the button for 3 seconds, you can disconnect the current BT device and search for new devices. Skip back Short press the Tune/Skip - button. Skip forward Short press the Tune/Skip + button.
EN Technical specification Power Input DC 9 V/2 A Audio output 2 x 5 W RMS Frequency range FM 87.5 - 108 MHz DAB 174.928 - 239.2 MHz Bluetooth 2402 - 2480 MHz Version 5.
EN Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
EN Operating Frequency Range: FM 87.5-108MHz / DAB 174.928-239.2MHz/Bluetooth 2402-2480MHz Max Output Power: 2 x 5 W DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.
