Content Main function -------------------------------------------------------------------------------------------1 Attention---------------------------------------------------------------------------------------------------2 Know the player------------------------------------------------------------------------------------------2 Touch key function -------------------------------------------------------------------------------------2 Remote control introduction ----------------------------------------------
z z z z Support multitask function, can read E-book while listening music Support AV out High-speed USB2.0 transmission Support windows XP, Vista, win7 Attention： This manual include the important safety measure and using products information, please read this manual before using it. 1. Don’t use the player in the environment of special hot, cold, more dust and humidity. 2.
1. Power key: Long press POWER for about 3 seconds to turn on/off unit 2. : Earphone jack 3. AV-OUT 4. USB slot 5. Hold key : Lock/unlock touch key or screen. 6. IR : For remote control 7. MIC 8. TF : TF slot Touch screen key function Under the main menu, you can touch to select the function, and enter the submenu.
1. Don’t touch too heavy, otherwise will cause the touch function is not sensitive or display broken. 2. When find touch is not sensitive, you can adjust the screen under Setting menu 3. When the unit is dead due operate is not correctly, press power key to ON position for 5-10 seconds to power off. The unit will be rest. You can restart the unit to use at that time. Power on / Power off Power on: Push the power key to ON position for around 4 seconds to power on.
enter. Under main interface, click to open or hide the shortcut menu. Click to display the clock. Click to enter music playing interface Volume: Click Brightness: Click to enter volume adjusting interface to enter brightness adjust interface Remote control introduction: 1． POWER/OFF: Short press to power off 2． :mute 3． _/`】【c/d】: left/right, up/down 4． OK: Play/pause, confirm 5．ESC: exit from a function. 6． SET: Enter menu 7．VOL－:Decrease volume 8．VOL+：Increase volume 1.
Under main interface, click want to play ,and click to enter, select the disk to enter play list, select the file you to pop up the menu, you can copy, paste, delete files. Key instruction : Click to select the previous file, click play /pause, click slide the bar to select the next file. Click to return to last menu. When playing movie, you can click to adjust the volume. Click Fast forward, fast backward: to and to return to the main menu.
Slide progress bar to adjust the playing point. Video Zoom: Under movie playing interface, click to switch among picture adjustment modes. Settings: Click to select the related settings, include last menu, track, brightness, zoom, play mode, sound channel, subtitle size and color. Click to return to last menu Click to set sound track (note: the file must contain more than one) Click to display Subtitles.
MKV/WMV/AVI/MP4/MOV/VOB/DAT/RM/RMVB/FLV AVI format video support resolution within 1280×720 with CODEC Coder Decode: XviD, H.264, DivX RMVB format video support resolution within 1280×720 with CODEC Coder Decode: RV40 FLV format video support resolution within 1280×720 with CODEC Coder Decode: H.
2.Click “Add”, will show the dialog box as below: 3. Select the original file you need to convert and output place for the converted video file. Then select and set the Parameter you want and click “Save”. As follow: 4.
5. After finished the conversion, will show as below： 6. The files that converted can be direct played in the player. 2. Music Under main interface, click to play. Click and select disk to enter the play list, select the file and click , to pop up the menu, you can copy, paste, delete files.
Medialib Click to order songs as per artist， click to order songs as per genre, click order songs as per year， click to order songs as per album， click to order songs as per star. Click to to check all songs in the list. Key instruction : Click to select previous song, click song/artist name to play or pause. Click ,to slide directly. to next song. Click in the middle of to last menu. When playing the song, click to adjust the volume.
Fast forward or Fast backward: Slide EQ Setting：Under playing status, click to adjust the playing point. at the right corner to switch the sound effect among nature, DBB, pop, rock, classic, jazz, vocal, dance, and soft. Settings：Click to enter setting menu, include last menu, playing mode, EQ, Lyric display, brightness, stars and Lyric colors. Click to last menu. Click to enter: only once, rotate one, rotate all ,sequence, random option. Click to select EQ selection.
Synchronous Lyric Display The player supports lyric files with *.LRC suffix, and displays synchronously. How to use lyric files? Please make sure the lyric has the same name to the music For example: Music file: My heart will go on.mp3 Lyric file: My heart will go on. lrc When playing the songs with lyric, click to select the lyric and it will show. It will show spectrum if there is no lyric files.
When browsing the photos, click the left side of screen to select the previous photo, click right side to select the next photo. Click the middle of screen to pop up the setting menu. Click to last menu ,when browsing the photo, you can click to slide to adjust the volume (only for the background music status). Click to return the main menu directly.
Click to Play/pause Click to zoom in, zoom out ,rotate. Click “+”to zoom in, click “-”to zoom out, click the direction arrow to move the photos, click clockwise, and click “X” to exit. Click to open the thumbnail photos Click to play music Click to enter the switch mode. Click to set the play time. Click to set the play sequence Click to set the brightness. Click to set the current photo as wallpaper .
Note: JPEG pixel max support among 6000*6000; BMP max support among 1000*1000. 4. Ebook Under main menu, click want to read, click and select the disk to enter list, and select the file (TXT) you will pop up the menu, you can copy, paste, delete the file. Key instruction: When reading ,click the top side of screen to previous page, click the down side of screen to next page, click the middle of screen to pop up the setting menu.
(Only for the background music status), click return to main menu.. Setting: click the middle of screen to pop up the setting menu Click to return to last menu. Click to play/ pause Click to enter rotate mode. Click to save mark. Click to load mark. Click to set the font size Click to set the font color. Click to set background photo. Click to adjust the brightness. Click to play music. Click to set the play time Click to set the font width.
5. FM Radio Under main menu, select FM radio and pres to enter as the following picture. Key instruction: 1) Under FM interface, click 2) Click / to adjust frequency; click to return to last menu ; Under FM interface, click adjust the volume. Click to auto search. to slide to return to the main interface directly. Function instruction: Settings： Click the to pop up the setting menu, included: Return to last menu, Channel list, auto search, Save channel, brightness.
1)Click to return to last menu. 2)Click to open the saved channel list and listening to the radio what you want 3)Click to auto search, after finished search, it will auto save the channels. 4)Click to save channel what you want. 5)Click to adjust the brightness. 6.
Click to preview / next year or month. Click to set the year, month, day, hour, minute and second. Click to last menu. Click to slide to adjust the volume (only for background music status) Settings：click to enter the setting menu Click return to last menu Click set. to set the year, month, day, hour, minute and second, click direction arrows to 7.
Under the record interface，click to start or pause the record, click to save record. click to return to the previous file, click to return to the main interface directly. Record quality setting： Under record interface，click to pop up record quality setting: Good quality, Normal quality, Poor quality.
8. Setting Under main menu, click to enter System set： a) Output: There are LCD, PAL, NTSC for option. Notes: PAL, NTSC modes, need connect the unit to an external screen through the audio/video cable. b) Language: There are: English, Simplified Chinese and Traditional Chinese for option. c) Autooff: There are 5 minutes, 10 minutes, 30 minutes, 1 hour, always on for option.
for option g) Disk Info You can see the information for this player: local disk memory and TF card memory. Power You can check the battery status. Adjust Click five “+” to finish the touch calibration and exit only calibrate ok. System info You can see the information for this player: Software version, size etc. Restore You can select if resume the unit to be the default setting or not. 9.
11.Games 1．Tetris Click on main screen display into Tetris as follow: Menu instruction： Next: Show the shape of next tetris Score: Show the score Grade: Show the grade; optional use.
1 : Quick Drop 2 : Rotate 3 : Move Left 4 : Move Right 5 :Down 6 :Return to main menu. 2． Sobkoban Click on main screen display into Sobkoban as below Menu instruction: Undo button-- to undo the last move Puzzle button-- to select a puzzle from a choice of 20 puzzles Restart button—to redisplay the Sobkoban puzzle in its current state.
12. Video output Connect the unit with the assorted AV (RCA) cable to TV, and set the TV as the current AV IN output status. Under main interface, click to enter setting mode. select output and select PAL/NTSC, it will show on TV. At that time, the screen will be black, you need operate by the remote control. Note: After connected the unit to TV, it’s better don’t put the unit to the right front side of the TV screen, the TV display may cause some disturbing for the remote control using. 13.
Read the TF card After insert the TF card, select "TF card" under main interface. Note: don’t remove the memory card during writing operations (ex. File copy) otherwise all the data contained can be corrupted irreparably. 14. USB and charge USB display mode This product is blessed with high-speed USB2.0 (full speed) interface, the standard mobile disk functions. Can support WindowsXP/Vista/Wind7 system, (no need install the driver).
Make sure volume is not on 0 position and the connection to earphone is correct. ● Noise Please check if the earphone head is clean. Please check if the music file is destroyed , try to play other music to confirm. Damaged MP3 files may have noise and even cannot be played ● Strange characters on display Make sure you have chose correct language.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the approriate and designated facility.
