User manual

E-10
10. To cancel program play, press the STOP  BUTTON twice while program play is running or open the
CD DOOR in stop mode.
11. Press ALBUM Bottom to choose the album. Press CD/USB/SD SHIFT BOTTM to change the sound
source.
12. To turn the Player off, press the POWER BUTTON. The LCD DISPLAY backlight will go “off”.
AUXILIARY (AUX) OPERATION
You can play other music sources (iPod, MP3 player or other digital audio player) through the speakers of this
System by connecting the AUX IN Jack to your external player’s LINE OUT jack or headphone jack.
1. The AUX IN and PHONES JACKS are covered by the DOOR (#16). Slide the DOOR downwards
2. Plug one end of an audio cable into the AUX IN Jack and the other end of the cable to the line out or
headphone jack of your digital audio player.
3. Set the FUNCTION SELECTOR to the “AUX” position.
4. Press the POWER BUTTON to turn on the System. The LCD DISPLAY goes “On”.
5. Play your digital audio player.
6. Adjust the VOLUME on the external audio player and the System until you reach a comfortable listening
level.
7. Turn the System and your audio player off when you have finished listening and then unplug the audio cable.
USING HEADPHONES (NOT INCLUDED)
Inserting the plug of your headphones into the System’s PHONES JACK will enable you to listen to the CD,
radio or other music sources in private. When using headphones, the speakers will be automatically
disconnected.
ALARM OPERATION
SETTING THE WAKE UP TIME
1. Press and hold the AL SET BUTTON and repeatedly press the HOUR BUTTON to set the correct wake
up Hour.
2. Press and hold the AL SET BUTTON and repeatedly press the MINUTE BUTTON to set the correct
wake up Minute.
NOTE
There is a PM INDICATOR located in the left-hand side of the clock display. Be sure to observe the PM
indicator when setting the alarm to make sure the alarm time is set correctly for AM or PM. If the PM
indicator appears in LCD DISPLAY, the alarm will be "PM". If not, the alarm time will be "AM".
TURNING ALARM FUNCTION ON/OFF
1. Press the AL.ON/OFF Button once to turn the alarm function on. The ALARM INDICATOR, “
” will
appear in the DISPLAY.
2. Press the AL.ON/OFF Button again to turn the alarm function off. The ALARM INDICATOR, “
” will
disappear in the DISPLAY.
CHECKING THE WAKE UP TIME
Whenever you want to check the wake up time, simply press the AL SET BUTTON. The display will change
from current time to wake up time. Release the AL SET BUTTON to return to current time.
WAKE TO RADIO
1. Press the POWER BUTTON to turn on the System. The LCD DISPLAY lights up.
2. Press the AL.ON/OFF Button once to turn on the alarm function. The ALARM
INDICATOR,
, will light up.