Instruction manual

1.2.4 System info
The system information displays information about your receiver such as software hardware
and date.
1.2.5 Timer
You can set the timer to make the receiver
perform designated actions inclubing timer
based wake up or sleep instructions to the
TV.
Use the UP/DOWN buttons to select timer.
Press theLEFT/RIGHT key to activate/inactivate
current timer. Press the ok button to enter your
selecttimer settings.
Acrion:You can select the follow function:
“Power on”:The receiver powers on at the
designated date and time
“Time interval” : The receiver switches on at the designated date and time, displays the
channel and then switches off at the designated date and time (The value set at the end
t
“Record”:The receiver will records program at the designated date and time
“Power Off”:The receiver powers off at the designated date and time.
ime).
Cycle
: You can set the cycle of the action designated in the timer mode (one time,
Daily or Weekly).
Start Date
: You can set the start date of the timer action.
Start Time
: You can set the start time of the timer action.
End Time
: You can set the end time of the channel viewing when the Timer mode is on Time
Interval.
Channel Type : Select between TV and Radio.
Channel name
: Press the RIGHT button to display the channel list and using the navigation
buttons select the channel to be shown when the receiver will power on by the timer.
33