Instruction manual

1.1.3.3 Polarity
You can select the polarity.
1.1.3.4 NIT Searching
You can select the NIT Searching.
1.1.3.5 Free
You can select the
free mode.
.
1.2 System setting
In this menu, you can configure the systems such as language Setting, OSD style, Parental
Control, TV Settings, Time Setting
and System Update.
1.2.1 Preference
You can set the
OSD language, the Audio
language, TV mode, Video output, Screen
mode, set factory default, Modulator settings
and
Time setting.
1.2.1.1 OSD Language
Press LEFT/RIGHT to select the
OSD
language.
1.2.1.2 Audio Lang
Press LEFT/RIGHT to select the
Audio language
.
1.2.1.3 TV Mode
Press LEFT/RIGHT to select
PAL or NTSC
.
If you don’t know which standard your TV has, please select
AUTO .
1.2.1.4
Press LEFT/RIGHT to select the
CVBS or RGB.
30
Video Output
1.2.1.5 Screeb Mode
Press LEFT/RIGHT to select the4:3 or 16:9.
1.2.1.6 Set Factory Default
P
Pres the OK key, enter thecode,the receiver will return to its factory default state, and the
date will be deleted.
NOTE:Your PIN code will change back to the factory setting”0000”
1.2.1.7 Modulator Option
Press OK to display sub menu,
press LEFT/RIGHT toselect the RF audio mode and RF channel.
ress LEFT/RIGHT to select the ALL or Scramble.