www.denver-electronics.com 21" COLOUR TELEVISION ON SCREEN DISPLAY REMOTE CONTROL HYPERBAND TUNER PERITELEVISION(SCART JACK) NTSC PLAYBACK TELETEXT DTX-2110 MANUAL Description: MANUAL Job No. 3B099M Brand Name: Model: 21NI P/No.
SPECIFICATIONS Receiving System Colour System Picture Tube Ext. Antenna Ext. In/Out Speaker : : : : : : BG PAL / NTSC Playback 54cm (21") diagonal 75 Ohm Coaxial Cable Peritelevision(Scart Jack) 16 Ohm x 2 Audio Output Power Consumption Dimension Net Weight : > 3W : AC 180-240V 50/60Hz, 80W : 602(W) x 488(D) x 457(H)mm : 22 kg REMOTE CONTROL Transmitting System Power Supply Dimension Net Weight : : : : Infrared DC 3V (1.
SPECIFICATIONS Thank you very much for your purchase of this product-the most natural Colour Television Receiver. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. INSTALLATION Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
CONTROL LOCATION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
INPUT AND OUTPUT TERMINALS 1. Audio Out Right channel Audio out 2. Audio In Right channel Audio in 3. Audio Out Left channel Audio out 4. Ground "Audio" 5. Ground of luminance signal "Blue" 6. Audio In Left channel Audio in 7. Luminance signal input "Blue" 8. Video switching voltage 9. Ground of luminance signal "Green" 10. No Connection 11. Luminance signal input "Green" 12. No Connection 13. Ground of luminance signal "Red" 14. Ground 15. Luminance signal input "Red 16. R.G.B. switching voltage 17.
OPERATION INSTRUCTIONS Turn the TV set on, then power indicator will light up. Press the program up or down button on the TV set,or press the on/off button on the remote control.The picture will appear after a few seconds . (If tuned on) The program number is displayed on the top right-hand corner of the screen. MENU BUTTON 1.Press this button to select menu. PRESET, PICTURE, SYSTEM ,and TIME menu can be selected cyclically. Preset Menu Picture Menu System Menu Time Menu Exit Menu 2.
OPERATION INSTRUCTIONS System menu SYSTEM COL.SYS AUTO SIF.SYS 6.0M BLUE BACK ON LOGO ON 1. COL.SYS You can change present color system in this item. 2. SIF.SYS You can change present sound system in this item. 3.BLUE BACK Blue back function can be opened by setting this item ON. 4.LOGO You can see the brand logo as you turn the Tv set on ,by setting this item£¢ ON.. Time menu TIME CLOCK TIMING TVON TVOFF AWOKE AWTIME _ _:_ _:_ _ OFF _ _:_ _ _ _:_ _ OFF _ _:_ _ 1.
LOCATION OF CONTROL (REMOTE HANDSET UNIT) 1 2 3 P.P. 4 5 6 7 8 9 - -/- - - 0 Q. VIEW REVEAL SIZE STOP CLOCK INDEL OFF ON/MIX SUB.PAGE SYS LOCK A.V. PROG.+ VOL.- MENU VOL.+ PROG.- POWER (STAND BY) BUTTON ( ) Press this button to turn the TV on/off. Press any Number Button or Program Up/Down Button, picture and sound will come on within a few seconds. MUTE BUTTON ( ) Press once to mute the sound, press again to return to previously set sound level.
LOCATION OF CONTROL (REMOTE HANDSET UNIT) VOLUME UP/DOWN BUTTONS (VOL+/-) Press Volume Up/Down Buttons to adjust sound level. PERSONAL PRESETS BUTTON (P.P.) You can select DYNAMIC, MILD, COLORFUL, STANDARD and CUSTOM by pressing this button. RECALL BUTTON ( ) Press this button sequentially to recall for the program number, color system and sound system on the screen. SLEEP BUTTON ( ) This key is used to set the sleep timer in 15 minutes step up to two hours. When the preset time runs to 0.
LOCATION OF CONTROL (REMOTE HANDSET UNIT)(TELETEXT OPTION) REVEAL (OPTION) Display hidden characters. Press this button repeatedly to switch between "CONCEAL MODE" and "REVEAL MODE" REVEAL MODE CONCEAL MODE Conceal mode will always be resumed when any of the teletext key is pressed except "REVEAL" key. SIZE (OPTION) The top or bottom half of any page can be enlarged teletext character size to double height by pressing this button.
BATTERY INSTALLATION (REMOTE CONTROL UNIT) 1. Remove the battery cover. 2. Insert two batteries of the 2 UM3-AA 1.5Vtype and make sure that polarity (+/-)_match the marks inside the unit. 3. Replace the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation becomes unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.
SERVICE TIPS BEFORE CALLING FOR SERVICE, HAVE YOU CHECKED ( ) THE FOLLOWING CHART Try diffe rent ch annel, Check if OK, p aerial c robably onnecti station Check ons on aerial fo trouble back o r broke f set Re-orie n wires nt aeria l (if indo Probab or type ly local ) interfere Adjust nce, su fine tun c h as a in g control Adjust n applia brightn nce ess co Adjust n trol contras t c o ntrol Check if statio n is bro Adjust adcasti colour ng colo control ur Check if syste m switch Check is corre if on/off
www.denver-electronics.
