DSS-7020 User manual - Bluetooth soundbar with wireless subwoofer
Product overview Description 1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: /SOURCE: Short press to power on, and then short press again for function change, long press to turn off. VOL-: Short or long press for volume down. VOL+: Short or long press for volume up. Bluetooth disconnect/pair: short press or long press to disconnect BT device. Short press or long press for Bluetooth pairing mode.
What's in the box: ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ 1* Soundbar 1* Subwoofer 2* Power Adaptor 1* User Manual 1* Remote Control 1* Wall Mount Bracket Remote control 1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: : Short press to switch the soundbar unit on or off (standby). TREBLE-: Press to decrease the treble effect. TREBLE+: Press to increase the treble effect. VOL+: Short or long press to turn the volume up. Short press to switch mute off if mute function is on. VOL-: Short or long press to turn the volume down.
Operation Inserting Batteries before using the Remote Control Insert AAA batteries to the Remote Control to activate it. Note: The Remote Control works within a range of 6 meters. Getting Started: 1: 2: 3: 4: Make sure you have made all the necessary cable connections before connecting the Soundbar to a wall outlet, when connected to the wall outlet, the soundbar will enter the standby mode and the power indicator will turn red.
AUX Source: 1: 2: Ensure that the soundbar is connected to the TV or other audio device via an AUX cable. Short press the “M” button on the Remote Control until you hear the voice "Auxiliary”. You also can short press the source button on the soundbar to choose the AUX source. OPTICAL IN Source: 1: 2: Ensure that the soundbar is connected to the TV or other audio device via an Optical cable. Short press the “M” button on the remote control several times until your hear the voice “optical”.
TV OPTICAL OPTICAL OUT OPTICAL IN LINE IN Source: 1: 2: Ensure that the soundbar is connected to the TV or other audio device via an audio cable (3.5 mm jack). Short press the button on the Remote Control several times until you hear the voice "Line in". You can also short press the Source button on the soundbar to choose the LINE IN source. HDMI Source Ensure that the soundbar is connected to the TV or other audio device via a HDMI cable.
and WMA files USB flashdrive play 1: Short press the button to turn on the soundbar, insert a USB flahsdrive into the USB connection. The soundbar will start playing the music from the USB. Short press to play/pause the music. Short press or to play the previous/next song. You can use USB flashdrives of max 128GB formatted in FAT32 format. The soundbar can play MP3, WAV and WMA files. Note: The USB connection is not intended for charging or connecting other devices.
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
