User manual

DVB Setting menu
You can set DVB menu by Pressing setup
User can edit the program name in TV Program menu of DVB
Move
Move will allow you move the position of the channels in the list.
Note: This option will not appears in this list when SETUP->Installation->LCN
is set to ON.
Delete
Delete will delete the program permanently from database. User must res can
to recover it.
Setting Country and Language
User can select preferred country and language at Setup - Installation
page.
How to receive the programs?
Scan the possible frequency and bandwidth to receive the programs.
There are start Auto Scan or Manual Scan.
Auto Scan
Auto Scan will erase the database first, and scans default frequency and
bandwidth by Country Setting.
(1) Press <Enter> button to confirm clear action and start Auto Scan.
It costs time to do Auto Scan, user can press <Enter> button to exit at anytime.
Later if you want to scan again, you can follow above Quick
Installation procedure.
Manual Scan
Manual Scan adds the scanning results into database, it doesn't erase the
database. But the User has to know the Frequency and Bandwidth for
scanning. If the user scans the same Frequency and Bandwidth more than
once, the previous programs will be overwritten.
Auto Time Zone/ Time Zone
Allow you to enable or disable Auto Time Zone update. If you know the GMT
(Greenwich Mean Time) time zone offset of your location, set the Auto Time
Zone to OFF and select an appropriate Time Zone, otherwise set it to OFF
and let the system update the time zone offset automatically according to the
broadcast stream.
Note: Some Countries are covered with more than one Time Zone.
-9-