ACT-8030W Quick Start Guide Introduction to appearance and keys Lens Infrared remote control lamp Charging /Busy indicator Busy indicator Display/Menu key 2.
ACT-8030W Quick Start Guide Power/Mode key Shutter/OK key Battery door Speaker Wifi/Down key Micro SD Card Micro USB port HDMI port ENG 2
ACT-8030W Quick Start Guide Start using _______ 1. Charge the built-in lithium battery USB cable Connect the camera to the computer for charging, at this time, the charging indicator will be in red, and it will be off after charging. Generally, it takes 2-4 hours to charge the battery. 2. Use the storage card 1.
ACT-8030W Quick Start Guide the storage card slot. 2. To take out the Micro SD card, press the tail of the storage card inwardly softly and it will be popped out. Note: There’s no built-in memory unit in the camera, so make sure to insert a storage card into it prior to use (it is recommended that a Micro SD card of better quality be used). 3. Power on/off 3.1 Power on: Press Power key for 3 seconds, the screen will be on and the camera will be started.
ACT-8030W Quick Start Guide 3.2. Power off: Hold on Power key for 3 seconds when the camera is in the idle state to turn it off. 3.3. Auto screen off: The screen will be turned off automatically when the time that the camera is in the idle state for automatic screen off to save power. After that, the lamp for screen off will be on. 3.4. Power off when the camera is lack of electricity.
ACT-8030W Quick Start Guide 6. Video recording mode After power is on, the video camera will enter video recording mode directly and in preview mode, press Shutter key to start video recording; Press it again to stop shooting. If the memory card is full or electrical quantity is low, it will also stop shooting: Taking a photo while recording: press the Power button during recording to take a photo. When a photo is taken, the texts “CAPTURE DONE” will display on the screen. 1.
ACT-8030W Quick Start Guide 1. Icon of mode, indicating the current is shooting mode; 2. Size of video, and 5M/8M//12M/16MP is optional; 3. Icon of quality of pictures; 4. Counter, indicating number of photos to be taken; 5. Icon of electrical quantity of battery. 8.
ACT-8030W Quick Start Guide Menu for setting mode Menu for replay mode Operation: Press Menu key, the menu for this mode will be displayed on the LCD. At this time, press Power key to move the cursor leftward or rightward and select on the menu, and press WIFI key to move the cursor upward or downward and select on the menu in a circulating way. Press OK key to confirm and press Menu key to return or exit from menu mode.
ACT-8030W Quick Start Guide Slowmotion Icon Press the Shutter to start recording, and press Shutter again to stop;Play the slow-motion video: Press the Power button to switch to Playback mode; select Video Press OK to play the video in a slow-motion effect, as shown in the right picture.
ACT-8030W Quick Start Guide Description of “timelapse” function Time Lapse function is mainly used to shoot cityscape, natural scenery, astronomical phenomena, and biological evolution.
ACT-8030W Quick Start Guide Timelapse icon Press the Shutter to start the Timelapse recording, and press Shutter again to stop; Play the recorded video: press the Power button to switch to Playback mode; select Video Press OK to play the video in a timelapse effect, as shown in the right picture.
ACT-8030W Quick Start Guide Note: If Timelapse funcion is activated under Photo mode, the device will only take photos according to the pre-set time interval, and will stop when reaching the set duraion. The operation is similar to Video mode. Application of remote controller Signal transmission port 1. Definition of keys of remote controller Power on/off key Keys of remote controller are as shown in the right figure: Video recording key Shooting key 2.
ACT-8030W Quick Start Guide Connect device to HDTV: Connect the video camera to an HDTV with a HD cable as shown in the following figure, display signals in the camera will be output into the HDTV automatically, and you can browse HD videos and photos that are recorded or taken in the HDTV.
ACT-8030W Quick Start Guide APP (for Android and iOS System) I. How to Obtain the APP Installation Program 1. For the Android System, you can search “DENVER ACTION CAM 2” in the Play Store to obtain corresponding installation programs, and then you can install them according to the indicated steps. 2. For the IOS System, you can search “DENVER ACTION CAM 2” in the APP Store to obtain corresponding installation programs, and then you can install them according to the indicated steps. II.
ACT-8030W Quick Start Guide 3. Enable the WIFI function of the Android mobile phone or tablet PC, and try to find the AP Name ACT-8030W; please conduct connection between them till the system reveals a successful connection; if you are conducting WIFI connection for the first time, please input the password: 1234567890. 4.
ACT-8030W Quick Start Guide for the IOS mobile phone or tablet PC, and then the Display Screen will show the Icon ; 2. Insert a Storage Card into the Camera and then power it on. Press the WIFI key to conduct WIFI connection, and the Screen of the Camera will show the WIFI signal Icon with the external screen revealing WIFI Connecting. 3.
ACT-8030W Quick Start Guide Warning • Lithium battery inside! • Do not try to open the product! • Do not expose to heat, water, moisture, direct sunlight! • Only charge with the original adaptor supplied with this product! ENG 17 CAUTION!
ACT-8030W Quick Start Guide ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
ACT-8030W Quick Start Guide As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households.