ACT-5030W Quick Start Guide Introduction to appearance and keys Lens Infrared remote control lamp Charging /Busy indicator Busy indicator Display/Menu key 2.
ACT-5030W Quick Start Guide Power/Mode key Shutter/OK key Battery door Speaker Wifi/Down key Micro SD Card Micro USB port HDMI port ENG 2
ACT-5030W Quick Start Guide Start using _______ 1. Charge the built-in lithium battery USB cable Connect the camera to the computer for charging, at this time, the charging indicator will be in red, and it will be off after charging. Generally, it takes 2-4 hours to charge the battery.
ACT-5030W Quick Start Guide 2. Use the storage card 1. Push the TF card into the slot till it is in place as per the instruction in concavely engraved words by the storage card slot. 2. To take out the TF card, press the tail of the storage card inwardly softly and it will be popped out. Note: There’s no built-in memory unit in the camera, so make sure to insert a storage card into it prior to use (it is recommended that a TF card of better quality be used). 3. Power on/off 3.
ACT-5030W Quick Start Guide 3.2. Power off: Hold on Power key for 3 seconds when the camera is in the idle state to turn it off. 3.3. Auto screen off: The screen will be turned off automatically when the time that the camera is in the idle state for automatic screen off to save power. After that, the lamp for screen off will be on. 3.4. Power off when the camera is lack of electricity.
ACT-5030W Quick Start Guide 6. Video recording mode After power is on, the video camera will enter video recording mode directly and in preview mode, press Shutter key to start video recording; Press it again to stop shooting. If the memory card is full or electrical quantity is low, it will also stop shooting: 1. Icon of mode, indicating video recording mode; 2. Indicate quality of video; 3. Indicate size of video, and FHD 1080P(30FPS) / HD 720P(60FPS) / HD 720P(30FPS) is optional; 4.
ACT-5030W Quick Start Guide 8. Menu operation There is a different menu in each working mode as shown in the following figures: Menu for video recording Menu for setting mode Menu for shooting mode Menu for replay mode Operation: Press Menu key, the menu for this mode will be displayed on the LCD. At this time, press Power key to move the cursor leftward or rightward and select on the menu, and press WIFI key to move the cursor upward or downward and select on the menu in a circulating way.
ACT-5030W Quick Start Guide Application of remote controller Signal transmission port 1. Definition of keys of remote controller Power on/off key Keys of remote controller are as shown in the right figure: Video recording key Shooting key 2. Use of remote controller: Using the remote controller, you can achieve functions of power on, video recording, shooting and power off without operating on the camera.
ACT-5030W Quick Start Guide Connect device to HDTV: Connect the video camera to an HDTV with a HD cable as shown in the following figure, display signals in the camera will be output into the HDTV automatically, and you can browse HD videos and photos that are recorded or taken in the HDTV.
ACT-5030W Quick Start Guide APP (for Android and iOS System) I. How to Obtain the APP Installation Program 1. For the Android System, you can search “DENVER ACTION CAM 1” in the Play Store to obtain corresponding installation programs, and then you can install them according to the indicated steps. 2. For the IOS System, you can search “DENVER ACTION CAM 1” in the APP Store to obtain corresponding installation programs, and then you can install them according to the indicated steps. II.
ACT-5030W Quick Start Guide connection; if you are conducting WIFI connection for the first time, please input the password: 1234567890. 4. Tap and enable the Application Program Icon on the Android mobile phone or tablet PC; you can directly view the preview picture transmitted by the Camera (see the following picture), and then conduct relevant operations. 1. Resolution 2. White Balance 3. Settings (Enter Settings Menu) 4. Enter the Playback Mode 5. Shutter Button 6. Photo Mode 7. Video Mode 8.
ACT-5030W Quick Start Guide and the Screen of the Camera will show the WIFI signal Icon with the external screen revealing WIFI Connecting. 3. Enable the WIFI function of the IOS mobile phone or tablet PC, and try to find the AP Name DENVER ACT-5030W; please conduct connection between them till the system reveals a successful connection; if you are conducting WIFI connection for the first time, please input the password: 1234567890. 4.
ACT-5030W Quick Start Guide Warning • Lithium battery inside! • Do not try to open the product! • Do not expose to heat, water, moisture, direct sunlight! • Only charge with the original adaptor supplied with this product! ENG 13 CAUTION!
ACT-5030W Quick Start Guide ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
ACT-5030W Quick Start Guide Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the approriate and designated facility.