Instruction Manual BTE-100 www.facebook.
1.Button instructions: 2. How to use 2.1 General Functions: Function instruction Turn on Press the button for 3 seconds when the device is off. Blue LED light slowly flash and a tone voice BEEP) Enter the pairing mode In power off mode,press the button and hold on for 6 seconds.(Blue LED and RED LED light quickly flash alternately with two beep tone voice).. Pairing In pairing mode,use a bluetooth function mobile phone or other bluetooth device to paired.(details refer to the part 2.
How to pair with phone ·Turn on your phone and ensure Bluetooth function is active. ·Turn on the Bluetooth earphones & go to the pairing mode ·Search after Bluetooth devices on your phone by following the phones’s instructions. Refer to your phone’s user manual for more information. ·After a few seconds the phone will list the names of active Bluetooth units. Choose “BTE-100”. ·Your phone might ask for a password, if so, enter 0000(4 zero).
Distortion ≤5.0% Playback time 6 hours Charging time 2.5 hours 4. FAQ 1. The earphones cannot turn on? Answer: Please ensure the battery is properly charged. This can take up to 2.5 hours. The LED light will turn on when charging, and turn off when fully charged. 2. There is no sound in the earphones? Answer: Check the connection between your earphones and the phone or PC. If the connection has been lost, please pair again.
batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Hereby, Inter Sales A/S, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of conformity may be obtained at: Inter Sales A/S, Stavneagervej 22, DK-8250 Egaa, Denmark.
