Bluetooth Fitness Armband User's Manual DENVER BFA-10 ALL RIGHTS RESERVED.COPYRIGHT DENVER ELECTRONICS A/S. www.denver-electronics.
DENVER BFA-10 Smart Bracelet User Manual - English [Compatibility] The Smart Wristband only supports the following selected mobile devices: IOS: OS must be IOS7.0 or later, Bluetooth 4.0; Such as: iPhone 4S, 5, iPod touch5, etc. Android: OS must be Android4.3 or later, Bluetooth 4.0; Such as: Samsung S4, Note3, etc.
2. Install APP: Go to App store or play store, download this APP: “DENVER BFA-10” and install it. To use DENVER BFA-10 APP, make sure your mobile device connected with internet via Wi-Fi or 3G. 3. Account set-up: Open the “DENVER BFA-10” App. Log in if you have an account, or register a new account. 4. Pairing Keep your phone with Bluetooth and WIFI “on” for this step. Log in the App DENEVR BFA-10, and the system shows the main page.
Android device will pop up [Device pair request], choose “confirm”, and finish pairing. IOS device will pop up [Pair Device Success], [Bluetooth Pairing Request], click “pair”, and finish paring. If the pop-up do not appear within 1 minute, repeat the above steps. 5. SYNC Data The bracelet SYNC data automatically after connected with phone by APP (DENVER BFA-10), the bracelet time will be calibrated same as the time of phone. SYNC data includes: steps, calorie, distance.
Turn on Sleep Mode: Press the button on the bracelet until it vibrates twice, the bracelet start sleep monitor mode, the icon shows up. To exit the sleep mode: Press the button on the bracelet until it vibrates twice, the bracelet exits the sleep monitor mode, the bracelet back to time display. 8. Restart the bracelet Press the button on the bracelet until it vibrates 3 times. Then the screen is shut off， white light glitters once, and the bracelet is restarted. A restart will not delete the recorded data.
keep “DENVER BFA-10” running in background. If there are security software on your phone, set up the software “DENVER BFA-10” as “trust”. IOS: If no call ID display, please restart your mobile and connect the bracelet again. When it is connected, please wait until the phone pops up “Bluetooth pairing request” and click “pair”, then the call ID display function comes. 4. The bracelet icon shows the Bluetooth was connected, but the APP cannot SYNC data? - Generally it is caused by the Bluetooth of the phone.
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
DK-8250 Egaa, Denmark. Imported by: DENVER ELECTRONICS A/S Stavneagervej 22 DK-8250 Egaa Denmark www.facebook.
