VB602 Video Baby Monitor User Manual V1
PRODUCT FEATURES Thank you for choosing this baby monitor. The sober design of our product easily integrates with all interiors and allows you to keep a watchful eye on your babies. Communication between transmitter and receiver is through radio waves at a max distance of 260 m (distance in open field). The digital connection provides transmission without interference. The camera is equipped with infrared LEDs that automatically switch on in case of insufficient light conditions.
PACKAGE CONTENT 1. 2. 3. Monitor X1 Camera X1 Power adapter X2 PRODUCT OVERVIEW Monitor 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. LCD display LED for charging indicator. LED power indicator Key Power On/Off Key menu/OK Key Return - undo.
12. 13. 14. 15. Key intercom Microphone Loudspeaker Power connector Camera 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Light sensor Camera lens Infrared LEDs Power LED Microphone Loudspeaker Paring key Key power on/off Temperature sensor Power connector CONNECT POWER Before installing the camera, test the device to make sure that the installing position is suitable for signal reception. Check for the signal reception. If necessary, relocate the camera to improve reception.
Connect the monitor to power Using the supplied power adapter, connect the monitor to power supply. The display turns on for a few seconds to indicate battery charging level. It is recommended that you completely charge the battery before first use. Power on Push the power key up on the monitor and camera respectively to turn the monitor and camera on respectively.
MAIN SCREEN 1. 2. 3. 4. 5. 6. 7. Signal level Temperature measured in child’s room Playhead of a melody in progress Alarm activated Battery level indication Activated intercom function Date and time MAIN MENU To access the main menu, press the OK button on the monitor. This menu contains 6 function options: 1. 2. 3. 4.
5. 6. Languages Information Press the navigation buttons ( / / / ) to select an option. PARING WITH CAMERA The display and the camera are paired at the factory. If the monitor is disconnected with the camera, pair the monitor with the camera. 1. Press the OK button to access the main menu. / / / ) to select the “camera” icon. 2. Press the navigation buttons 3. 4. Press the /OK button to enter the sub-menu. Press the menu/OK button again to start recording.
VOLUME CONTROL When the camera is in operation, press the volume buttons on the monitor to adjust audio volume from the camera. ALARM This function allows you to set one or more alarm timers. Select the alarm timer that you wish to change, and select “Edit” by pressing the OK button. • • To activate the alarm, press the key “Up” ( ). To change the line, press the key “right” ( ). • To change time, press “Up/Down” ( • • Press “Left/Right” ( / ) to switch to minutes.
• To change the line, press “Up/Down” ( / ), the press the OK button to select the line. • To change time, press “Up/Down” ( • • Press “Left/Right” ( / ) to switch to minutes. To activate summer time, select the line with the “Left/Right” ( press “Up/Down” ( • • • • / / ). / ) buttons, and ) to change “On” or “Off”. When the settings are finished, select “Done” by pressing the OK button to save. Temperature scale: Celsius or Fahrenheit degrees.
LANGUAGES Allow you to select a menu language. The languages include: English\French\Spanish\Portuguesa\Italian\Deutsch SYSTEM INFORMATION The system information icon contains data of the software installed in the product. CLEANING AND MAINTENANCE • Do not clean with abrasive or corrosive substances. • Use a slightly moistened soft cloth. • Do not spray with aerosol as this will damage the interior of the product. • Avoid direct contact with the camera lens. • Fully charge the battery before first use.
This page has been left blank intentionally.
This page has been left blank intentionally 11
VB602 Digital video baby monitor Made in PRC
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.
