Specifications

2-2
2.1.1 Installation Procedures
Install the WINCAPS II according to the following procedure.
"
STEP 1
Terminate all the currently running applications.
"
STEP 2
Insert the WINCAPS II CD-ROM in a CD-ROM drive of your personal
computer.
Denso NetwoRC screen appears. Select “Install WINCAPS II” from the
menu.
If the screen does not appear, proceed to the STEP 3.
Note: f you install the WINCAPS II from the floppy disks, proceed
to the STEP 3.
"
STEP 3
Click Start at Windows 95 and then click Run. Type the WINCAPS II
installer name in the Open box and click OK.
Drive E is for CD-ROM (Example)
Note: When loading software from floppy disks, insert DISK-1 into
a floppy disk drive and then select Setup.exe file.