Specifications

26
Step 7
Secure the floppy disk drive mounting plate with four screws.
Step 8
Connector J6 FDD 26P on the printed circuit board has a cable lock.
If the connector is locked, lift and unlock it. The lock is made of resin. Do not appl
y
excessive force to it since the lock could easily break. Handle it with extra care.
Full
y
insert the flat cable of the flopp
y
disk drive into connector J6 FDD 26P on the
circuit board. If the flat cable is inserted full
y
, the blue line marked on the
connecting section will become aligned with the top edge of the connector.