Installation guide

Active USB-COM Port Driver Installation Guide

2. Installation

This section describes how to install Active USB-COM Port Driver. Here, the installation steps

of Windows 7 and Windows XP are described. Perform them in accordance with the

installation wizard about Windows vista, too.

Note:

In case of Windows Vista and Windows 7, when a new device is connected, the search of its

driver is started automatically. Then, quite a bit of time for search is spent. The above

problem may be improved with setting to skip the search of Windows Update. About setting it,

comply with the OS specification.

2.1 Steps of installation

This driver consists of the virtual serial port driver and the USB driver.

The steps of the driver’s instillation are following. Please comply with the below steps.

 The case that the number of the connected USB device is determined

 The case that one USB device is added repeatedly

Installation Start

[STEP1] Installation of virtual serial port driver

[STEP2] Installation of USB driver

Completed the qty. of all?

Installation End

Completed the qty. of all?

Yes

Installation Start

[STEP1] Installation of virtual serial port driver

[STEP2] Installation of USB driver

Installation End

Completed the qty. of all?

Yes