Installation guide
Active USB-COM Port Driver Installation Guide
12
7) The following completion dialog comes out. Then click “Finish” button.
8) Please confirm the installed driver on the screen of the device manager.
2.4 How to unplug the hardware in safety
If you need to confirm the status of the USB device or unplug the device under USB device
connection, the message “Unplugging DENSO WAVE USB Device (COMx) in safety” is
displayed on the task tray.
2.5 Changing the COM port number
You can change the COM port number on the device manager.
Note:
You should change the COM port number after removing the device.
In case though you change the COM port number, the display of device manager or task tray
icon is not be updated, please make the imaginary serial port enable after making the port
disable temporality in order to update the display of COM port number.