Installation guide

Active USB-COM Port Driver Installation Guide
8
6) The following completion dialog comes out. Then click “Finish” button.
2.3 [STEP2] Installation of USB driver
To install the USB driver, please plug a USB device in the USB port. The step is as below.
[Windows 7]
1) Connect a target USB device to your PC.
2) The following message is displayed on Task Bar.
3) Open the status. The following window is displayed.
Installation of USB driver Start
Plug a supported DENSO WAVE USB device.
Execute the steps in accordance with Windows wizard.
Installation of USB driver End
XXXXX
CU-421 is displayed as “CU-221/321”.
CU-621 and CU-821 are displayed as “CU-521”.