Specifications

539
Appendices
*17
To defragment the drive, set "0," "1," or "2." Setting "1" or "2" will display an absolute bar
graph or relative bar graph indicating the defragmentation progress during drive defrag-
mentation, respectively. The bar graph will disappear after completion of defragmentation
and the previous screen will come back.
To defragment the drive while showing a relative bar graph, write as follows:
OUT &h60E2,1 ’Defragment the drive showing relative bar
’graph
*18
To activate the remote wakeup, set "1"; to deactivate, set "0."
*19
Set the transmission speed to be applied for remote wakeup.
*20
You may set the timeout period during which the BHT will wait for proper data (specified
remote wakeup character string) after receiving any data via the CU from the host.