Specifications

515
Appendices
103h
Communications pathway already connected
104h
Communications pathway already disconnected
105h
Power-off detected
106h
An internal error has occurred in the TCP/IP module during data
transmission.
107h
The TCP/IP module has not been initiated.
108h
The memory for the TCP/IP module has became insufficient during
data transmission.
110h
Response other than 2XX received
111h
File not closed
201h
Cannot connect to socket
209h
Socket identifier is invalid.
20Dh
Attempt to connect to different FTP server without disconnecting
216h
A parameter is invalid.
The FTP client handle is invalid.
A parameter is invalid, or the socket is already bound.
218h
Too many sockets
224h
The socket is being assigned an address.
225h
The last close operation for the specified socket is not complete.
228h
The maximum number of bytes to receive is too small.
229h
The specified socket does not match the connection target socket.
22Ah
This option is not recognized at the specification level.
22Bh
This protocol family does not support the specified protocol type and
protocol.
22Fh
The specified address family is invalid for this socket.
230h
The specified address is already in use.
231h
The specified address is invalid.
236h
An RST from the opposite end has forced disconnection.
237h
There is insufficient system area memory.
238h
The specified socket is already connected.
239h
The specified socket is not connected.
23Ah
The specified TCP socket has been closed.
23Ch
The connection attempt has timed out.
23Dh
Failed to connect
241h
There is no connection pathway to the host for TCP socket.
Error code Meaning