Specifications

514
36h
Improper file type
(The statement attempts an operation that conflicts with the file type-
-data file, communications device file, or bar code device file.)
37h
File already open
(An
OPEN statement executed for the already opened file.)
38h
The file name is different from that in the receive header.
39h
Too many files
3Ah
File number out of the range
3Bh
The number of the records is greater than the defined maximum
value.
3Ch FIELD overflow
(A
FIELD statement specifies the record length exceeding 255
bytes.)
3Dh A FIELD statement specifies the field width which does not match
one that specified in file creation.
3Eh FIELD statement not executed yet
(A
PUT or GET statement executed without a FIELD statement.)
3Fh
Bad record number
(The record number is out of the range.)
40h
Parameter not set
(ID not set)
41h
File damaged
42h
File write error
(You attempted to write onto a read-only file.)
43h
Not allowed to access data in drive B
Not allowed to access a read-only file
45h
Device files prohibited from opening concurrently
46h
Communications error
47h
Abnormal end of communications or termination of communications
by the Clear key
48h
Device timeout
(No CS signal has been responded within the specified time period.)
49h
Received program file not correct
F0h
Mismatch parameter number
F1h
Mismatch parameter type
F2h
Out of string variable space
Insufficient number of array variable elements
100h
Cannot specify communications pathway
101h
Cannot connect to communications pathway
102h
Communications pathway not specified
Error code Meaning