Specifications

Chapter 18. TCP/IP
499
Syntax:
CALL "FTP.FN3" .fcFTPOpnU FTPHANDLE%, SERV.IP$,
USERNAME$,
PASSWORD$, REPLY%
Description: This function opens an FTP client session based on the supplied user set-
tings.
Parameters:
SERV.IP$ FTP server IP address in dotted quad notation
USERNAME$ User name for FTP authentication
PASSWORD$ Password for FTP authentication
Return value:
FTPHANDLE% FTP client handle, for use by following functions
REPLY% Server response to FTP command
Run-time errors:
.fcFTPOpnU Open FTP client session with user settings
Error code Meaning
105h
Power-off detected
106h
An internal error has occurred in the TCP/IP module during data
transmission.
107h
The TCP/IP module has not been initiated.
108h
The memory for the TCP/IP module has became insufficient dur-
ing data transmission.
110h
Response other than 2XX received
20Dh
Attempt to connect to different FTP server without disconnecting
216h
The FTP client handle is invalid.
239h
The specified socket is not connected.
23Ch
The connection attempt has timed out.