Specifications

476
Run-time errors:
Example: Append operation
Incoming data: 1024 bytes ("0123456789..........0123")
Receive buffer: 8 elements, 128 characters each for a total of 1024 bytes
• After initializing receive buffer
Error code Meaning
105h
Power-off detected
106h
An internal error has occurred in the TCP/IP module during data
transmission.
107h
The TCP/IP module has not been initiated.
108h
The memory for the TCP/IP module has became insufficient dur-
ing data transmission.
209h
Socket identifier is invalid.
216h
A parameter is invalid.
228h
The maximum number of bytes to receive is too small.
236h
An RST from the opposite end has forced disconnection.
237h
There is insufficient system area memory.
239h
The specified socket is not connected.
23Ah
The specified TCP socket has been closed.
Element 0
Element 7
–
• • • • • • • •
[ Strings ]1 2 3 4 5 125 126 127 128
– – – – – – – –
–
• • • • • • • •
– – – – – – – –