Specifications

424
Syntax: CALL "SS.FN3" .fcParaSGet PARA%,DATA$
Description:
This function reads string (DATA$) from the wireless block setting speci-
fied by
PARA%.
Parameters: PARA% Item number
Returned value: DATA$ String read from the specified wireless block setting
Correspondence table:
Note:
The above parameter should be referred to after execution of OPEN
"COM3:"
statement.
Run-time errors:
.fcParaSGet Read string from the wireless block parameter
Item number
(PARA%)
Wireless block
parameter
Parameter value (DATA$)
.ssFWVerGet 1 Wireless block firmware
version
Character string, 4 bytes
.ssMACIDGet 2 Physical address Character string, 6 bytes
Error code Meaning
05h
Parameter out of the range
34h
Bad file name or number (The spread spectrum communications
device is not opened.)
F0h
Mismatch parameter number
F1h
Mismatch parameter type
F2h
Insufficient string variable storage area
105h
Power-off detected
400h
Failed to get the setting value. (Failed to set the value.)